Samsung 100, 700, 500 PROGRAM PERSONAL SPEED DIAL NAMES FOR OTHER STATIONS, 00:, NOT, 05:, SPK, 00:, TRSF, DIAL, 00 :, DIAL, DOWN, DOWN, HOLD, DOWN, DOWN, HOLD, TRSF, [201], SPEED

iDCS KEYSETS

8D KEYSET PROGRAMMABLE		28D KEYSET, 18D KEYSET
KEYS LAYOUT		PROGRAMMABLE KEYS LAYOUT
A	B		VOLUME
C	D		C	Transfer
		A		E
E	F			Speaker
		B	D	F
Transfer	Speaker

DS 5000 SERIES KEYSETS

7S KEYSET PROGRAMMABLE	14D KEYSET PROGRAMMABLE
KEYS LAYOUT	KEYS LAYOUT

A B C D E F A B C D E F

21D KEYSET PROGRAMMABLE

KEYS LAYOUT

A B C D E F

Open customer programming and follow the instructions below.

ACTION		DISPLAY
1.	Press TRSF and then dial 105	[201]	SPEED	DIAL
	Display shows	00 :
2.	Dial the station number (e.g., 205) OR	[205]	SPEED	DIAL
	press UP or DOWN to select the station	00 :
	and press the right soft key to move the
	cursor OR press the left soft key to go
	to step 4
3.	If the selected station has no speed dial	[205] SPEED DIAL
	bins, this display will be shown and a new	SPDBLK	NOT	EXIST
	station may be selected

22

4. Dial the location number (e.g., 05) OR	[205]	SPEED DIAL
press UP or DOWN to select the location	05: _
and press the right soft key to move the
cursor OR press the left soft key to return
to step 2
5. Enter the trunk access code (e.g., 9)	[205]	SPEED DIAL
followed by the number to be dialed	05 : 9-4264100_
(e.g., 4264100) OR press the right
soft key to return to step 2 OR press the
left soft key to return to step 3 OR press
HOLD to clear an entry (if an error is made,
use the DOWN key to step back)

6.Press the F key to access Program Station Speed Dial Names OR press TRSF to save and exit programming OR press SPK to save and advance to the next program

DEFAULT DATA: NO SPEED DIAL NUMBERS PROGRAMMED

PROGRAM PERSONAL SPEED DIAL NAMES FOR OTHER STATIONS

Each individual station user can program his/her own names but in cases where it is impractical or for single line telephone users, this program allows a system administrator to view or change any station’s speed dial names. The station speed dial codes are 00–49. Each station begins with ten numbers (00–09) and can be assigned more in blocks of ten up to a maximum of fifty numbers.

PROGRAM KEYS

UP & DOWN - Used to scroll through extension numbers and speed dial bins. KEYPAD - Used to enter selections.

SOFT KEYS - Move cursor left and right.

SPK - Used to store data and advance to next program.

HOLD - Used to clear previous entry.

ANS/RLS - Used to select ALL.

ACTION	DISPLAY
1. Press TRSF and then dial 106	[201] SPEED NAME
Display shows	00:
23