CUSTOMER SET RELOCATION
This program is used to swap information associated with two stations. All assignments such as trunk ring, station group, station COS, station speed dial etc. will follow this program. 18 button keysets and 28 button keysets can be exchanged. If incompatible set types are selected the system will provide an ERROR: NO MATCH message. 18 button and 28 button key assignments should be taken in consideration when relocating these type of sets.The table below shows which phones can be switched with each other.
NOTE: In order to use this program it must first be activated by a technician. Please see your installing company to have this done if you wish to use this program.
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
ANS/RLS - Used to select ALL.
ACTION | DISPLAY |
| ||
|
|
|
| |
1. | Press TRSF 315 | SET | RELOCATION | |
| Display shows | EXT | _ | EXT |
|
|
|
| |
2. | Enter first station number (e.g., 202) | SET | RELOCATION | |
| Press RIGHT soft key to move cursor | EXT | 202 | EXT _ |
|
|
|
| |
3. | Enter second station number (e.g., 210) | SET | RELOCATION | |
| Press RIGHT soft key to enter data | EXT | 202 | EXT 210 |
|
|
|
| |
4. | Display will return to STEP 1 | SET | RELOCATION | |
| Go to STEP 2 | EXT | _ | EXT |
| OR press TRSF to store and exit |
|
|
|
| programming. |
|
|
|
| DS5007S | NO | NO | NO | NO | NO | NO | NO | NO | NO | NO | YES |
|
|
|
|
|
|
|
|
|
|
|
|
|
| DS5014D | NO | NO | NO | NO | NO | NO | NO | NO | NO | YES | NO |
|
|
|
|
|
|
|
|
|
|
|
|
|
| DS5021D | NO | NO | NO | NO | NO | NO | NO | NO | YES | NO | NO |
|
|
|
|
|
|
|
|
|
|
|
|
|
| SET RELOCATION ALLOW TABLE | NO | NO | NO | NO | NO | NO | NO | YES | NO | NO | NO | |
ITP5121D- | NO | NO | NO | NO | NO | NO | YES | NO | NO | NO | NO | |
ITP5107S- | NO | NO | NO | NO | NO | YES | NO | NO | NO | NO | NO | |
iDCS28B | NO | NO | NO | YES | YES | NO | NO | NO | NO | NO | NO | |
iDCS18B | NO | NO | NO | YES | YES | NO | NO | NO | NO | NO | NO | |
| CUSTOMER |
|
|
|
|
|
|
|
|
|
|
|
|
DSDCS, AOM64iDCS | NO NO | YES NO | NO YES | NO NO | NO NO | NO NO | NO NO | NO NO | NO NO | NO NO | NO NO | |
| 8B iDCS |
|
|
|
|
|
|
|
|
|
|
|
| & |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Single Line | YES | NO | NO | NO | NO | NO | NO | NO | NO | NO | NO |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Single Line | DCS, DS & iDCS 64 AOM | iDCS 8B | iDCS 18B | iDCS 28B | DS5021D | DS5014D | DS5007S | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
3435