Samsung 100, 700, 500 PROGRAM SYSTEM SPEED DIAL NAMES, PROGRAM PERSONAL SPEED DIAL NUMBERS FOR OTHER STATIONS, SPK, SYS, SYS, SYS, SPK, A B, E F, 505:, DOWN, HOLD, TRSF, NAME, 500:

4. Press the F key to toggle to Program	SYS SPEED NAME
System Speed Dial Names, step 3 to	505:
enter the name

5.Press TRSF to store and exit programming OR press SPK to store and advance to the next program

DEFAULT DATA: NO SPEED NUMBERS ASSIGNED

PROGRAM SYSTEM SPEED DIAL NAMES

This program is used to assign a character name or identification for each system speed dial location. This name enables you to locate the speed dial number when you are using the directory dial feature.You may assign a name 11 characters long.

PROGRAM KEYS

UP & DOWN - Used to scroll through speed dial bins.

KEYPAD - Used to enter selections.

SOFT KEYS - Move cursor left and right.

SPK - Used to store data and advance to next program.

HOLD - Used to clear previous entry.

ACTION		DISPLAY

1.	Press TRSF and then 706	SYS	SPEED	NAME
	Display shows the first name	500:

2.	Dial the system speed number (e.g., 505)	SYS	SPEED	NAME
	OR press UP or DOWN to select the entry	505:
	number and press the right soft key to
	move the cursor

3.	Enter the name as shown in Program	SYS	SPEED	NAME
	Station Names and press the right soft	505:SAMSUNG
	key to return to step 2 OR press the

F key to toggle to the speed dial number to return to Program System Speed Dial Numbers, step 4

4.Press the right soft key to return to step 2 above OR press TRSF to store and exit programming OR press SPK to store and advance to the next program

PROGRAM PERSONAL SPEED DIAL NUMBERS FOR OTHER STATIONS

Individual station users can program their own numbers, but in cases where this is not practical, or for single line telephone users, this program allows a system administrator to view or change any station’s speed dial numbers. The station speed dial codes are 00–49 or 000–049. Each station begins with ten numbers (00–09) and can be assigned more in blocks of ten (up to a maximum of fifty num- bers).

Each speed dial number consists of a line access code and the telephone number to be dialed. The access code can be any line group, individual line, station group or individual extension. The speed dial number can be up to 24 characters long including ✱, #, FLASH and PAUSE.

NOTE: If Least Cost Routing (LCR) is used, the LCR access code must be entered.

When you are entering a speed dial number, there are some special keys that you will need to use. These are the bottom row of programmable keys on the LCD 12B and LCD 24B keysets and are known as keys A, B, C, D, E and F.

PROGRAM KEYS

UP & DOWN - Scrolls through extension numbers and speed dial bins. KEYPAD - Used to enter number.

HOLD - Press to clear entry. A - Does not have a function. B - Inserts a FLASH.

C - Inserts a PAUSE.

D - Changes the dialing type from pulse to tone. E - Hides and displays digits.

F - Changes display to speed dial name entry.

DCS KEYSETS

24 BUTTON KEYSET

PROGRAMMABLE KEYS LAYOUT

12 BUTTON KEYSET

PROGRAMMABLE KEYS LAYOUT

A B	C D E	F	A	B C D	E F