Samsung 100, 700, 500 PROGRAM SYSTEM SPEED DIAL NUMBERS, A B, E F, SYS, SYS, SYS, DOWN, HOLD, TRSF, 500:, DOWN, 505:, C D E, B C D, KEYPAD, ACTION, SPK/RLS, DISPLAY, SPEED DIAL

PROGRAM SYSTEM SPEED DIAL NUMBERS

The system list starts with 200 numbers and can be increased in blocks of ten.The system may have either 500 or 950 maximum depending on the setting in MMC 861. See your service company to increase or decrease the system list.

The speed dial codes are 500–999 or 050–999. Each speed dial number consists of a line access code and the telephone number to be dialed.The access code can be any line group,individual line,station group or individual extension.The speed dial number can be up to 24 characters long including ✱, #, FLASH and PAUSE.

NOTE: If Least Cost Routing (LCR) is being used, the LCR access code must be entered.

When you are entering a speed dial number, there are some special keys that you will need to use. These are the bottom row of programmable keys on the keysets and are known as keys A, B, C, D, E and F.

PROGRAM KEYS

UP & DOWN - Select the speed dial bin.

KEYPAD - Used to enter number.

HOLD - Press to clear entry.

SPK/RLS - Save data and advance to next program.

A - Does not have a function.

B - Inserts a FLASH.

C - Inserts a PAUSE.

D - Changes the dialing type from pulse to tone.

E - Hides and displays digits.

F - Changes display to speed dial name entry.

DCS KEYSETS

24 BUTTON KEYSET

PROGRAMMABLE KEYS LAYOUT

12 BUTTON KEYSET

PROGRAMMABLE KEYS LAYOUT

A B C D E F A B C D E F

18

iDCS KEYSETS

8D KEYSET PROGRAMMABLE		28D KEYSET, 18D KEYSET
KEYS LAYOUT		PROGRAMMABLE KEYS LAYOUT
A	B		VOLUME
C	D		C	Transfer
		A		E
E	F			Speaker
		B	D	F
Transfer	Speaker

DS 5000 SERIES KEYSETS

7S KEYSET PROGRAMMABLE	14D KEYSET PROGRAMMABLE
KEYS LAYOUT	KEYS LAYOUT

A B C D E F A B C D E F

21D KEYSET PROGRAMMABLE

KEYS LAYOUT

A B C D E F

Open customer programming and follow the instructions below.

ACTION		DISPLAY
1.	Press TRSF and then dial 705	SYS	SPEED DIAL
	Display shows the first number	500:
2.	Dial the speed bin desired (e.g., 505) OR	SYS	SPEED DIAL
	press UP or DOWN to choose and	505:
	press the right soft key to move the cursor
3.	Enter the access code (e.g., 9—the system	SYS	SPEED DIAL
	will automatically insert a dash) followed by	505:9–121223456789
	the phone number (up to 24 digits long)
	and press the right soft key to return to
	step 2
19