Failure to enter the time using the 24 hour clock will cause the date to change at 12:00 P.M. Open customer programming and follow the instructions below.

ACTION

DISPLAY

 

 

 

1.

Press TRSF and then dial 505

OLD:6010184:0047

 

Display shows

NEW:WMMDDYY:HHMM

 

 

 

2.

Enter the new time and date using

OLD:6010184:0047

 

the above format

NEW:3020994:1445

 

 

 

3.

Verify the time and date and reenter

OLD:3020994:1445

 

them if necessary

NEW:WMMDDYY:HHMM

4.Press TRSF to store and exit programming OR press SPK to store and advance to the next program

If you have entered invalid data, you will receive an [ INVALID ENTRY ] message for three seconds. Reenter the correct date and time. If the information you entered is incorrect, repeat the procedure.

RESET STATION PASSCODES

TO DEFAULT

Individual keyset users can set or change their own individual passcodes. These passcodes are used to lock and unlock keysets, override toll restriction and access the DISA feature. At times, it may be necessary for the system administrator to reset a station’s passcode to default“1234.”This program cannot be used to display passcodes, only to reset them.

PROGRAM KEYS

UP & DOWN - Select the extension number.

HOLD - Press to reset the passcode.

Open customer programming and follow the instructions below.

ACTION

DISPLAY

 

 

1. Press TRSF and then dial 101

[201] PASSCODE

Display shows

PASSCODE:✱✱✱✱

2.

Dial the station number OR use the

[205] PASSCODE

 

UP and DOWN keys to scroll through

PASSCODE:✱✱✱✱

 

the keyset numbers and press the

 

 

right soft key to move the cursor right

 

 

 

 

3.

Press HOLD to reset the passcode

[205] PASSCODE

 

 

PASSCODE : 1234

4.Press the right soft key to return to step 2 OR press TRSF to store and exit programming OR press SPK to

store and advance to the next program

DEFAULT DATA: ALL STATION PASSCODES = 1234

PROGRAM STATION NAMES

This program is used to assign a character name or identification for each exten- sion. You may assign a name of 11 characters long.

PROGRAM KEYS

UP & DOWN - Used to scroll and move cursor.

KEYPAD - Used to enter characters.

HOLD - Press to clear entry.

Open customer programming and follow the instructions below.

ACTION

DISPLAY

 

 

 

 

1.

Press TRSF and then dial 104

[201]STN NAME

 

Display shows

 

 

 

 

 

 

2.

Dial station number (e.g., 205)

[205]

STN NAME

 

OR press UP or DOWN to select the

 

 

 

station and press the right soft key to

 

 

 

move the cursor

 

 

 

 

 

 

3.

Enter the station name using the

[205]

STN NAME

 

procedure described on the next page

SAM SMITH

 

and press the right soft key to return to

 

 

 

step 2

 

 

1213