Samsung 83I manual Set up UPnP access on a Windows PC - cont

Models: 83I

1 96
Download 96 pages 21.54 Kb
Page 36
Image 36
Set up UPnP access on a Windows PC - cont.

Set up UPnP access on a Windows PC - cont.

4.Rotate the Tuning/Select control until 'Shared media' is highlighted and press the control to select. The sound system will scan for all available UPnP servers. It may take a few seconds for the radio to complete its scan. The radio will display '<Empty>' if no UPnP servers are found.

5.After scanning, select your UPnP server using the Tuning/Select control. If you are using WMP 11 as the server, your sound system will then normally display 'Unauthorised - Select to retry' at this stage.

6.Your PC may prompt you that there has been a connection to your UPnP server. Whether prompted or not, in order that the sound system may access the music files, you will need to click the 'Library' tab in WMP 11 and select the 'Media Sharing…' item to open the 'Media Sharing' window. Make sure the box 'Share my media to:' is ticked.

7.In the 'Media Sharing' window, the sound system will be listed as an unknown device. Click on the unknown device shown to select it, then click the 'Allow' button and then click 'OK'.

Note: If you are using Microsoft Windows' firewall software, this should be correctly configured by WMP 11. If you are using third party firewall software you may need to manually configure it to allow your unit and WMP 11 to communicate (see the 'Troubleshooting' section on page 89).

8.On the sound system, select the named server again using the Tuning/Select control. If WMP 11 is now able to communicate with your sound system you will be presented with some media selection options on the display.

4-8

Allowing a device to connect to Windows Media Player 11

35

Page 36
Image 36
Samsung 83I manual Set up UPnP access on a Windows PC - cont