Finding new DAB radio stations

Finding new DAB radio stations

Should you wish to use your sound system for DAB reception in a new location, or if no stations were detected during the initial scan, you can follow this procedure to allow your sound system to find out which DAB radio stations are available.

1.Ensure that the telescopic antenna is extended, and then press the Mode button as needed to select DAB radio mode.

2.Once in DAB mode press the Menu button.

3.Rotate the Tuning/Select control until 'Local scan' is highlighted on the display.

4.Press the Tuning/Select control to initiate the scan. The display will show 'Scanning' and your radio will perform a scan of the DAB frequencies used in the UK. As new stations are found the station counter will increase and stations will be added to the list. The bar graph indicates the progress of the scan.

5.To carry out a full scan of the entire Band III DAB frequencies rotate the Tuning/Select control until 'Full scan' is highlighted on the display.

6.Press the Tuning/Select control to initiate the scan. The display will show 'Scanning'. As new stations are found the station counter on the right hand side of the display will increase and stations will be added to the list. The bar graph indicates the progress of the scan.

Due to the larger number of DAB channels scanned, the full scan will take longer than the local scan.

1

2

3-6

59

Page 60
Image 60
Samsung 83I manual Finding new DAB radio stations