FM Radio

FM Radio

Operating your sound system in FM mode

1.Carefully extend the telescopic aerial and press the On/Off button to switch on your sound system.

2.Press the Mode button as needed to select FM radio mode.

3.Rotate the Tuning/Select control in a clockwise direction.The displayed frequency will increase. Press the Tuning/Select control to carry out an auto-tune. Your radio will scan up the FM band from the currently displayed frequency and will stop scanning when it finds a station of sufficient strength.

4.The display will show the frequency of the signal which has been found. If RDS information is available, after a few seconds the display will show the radio station name.

If you only hear hiss or interference, simply press the Tuning/Select control to scan further. Your sound system may have found a spurious interference signal.

5.To find more FM stations press the Tuning/Select control to repeat the scan operation. To scan down in frequency, rotate the Tuning/Select control in a anti-clockwise direction first and then press the control. Your radio will scan down the FM band from the currently displayed frequency and will stop scanning when it finds a signal of sufficient strength.

6.When the end of the waveband is reached your sound system will recommence tuning from the opposite end of the waveband.

7.Use the Volume control to adjust the sound level as needed.

FM Radio

1

2

3-5

7

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

64

Page 65
Image 65
Samsung 83I manual FM Radio, Operating your sound system in FM mode