Using the remote controller
Point the remote controller towards the remote controller receiver of the indoor unit (see page 16 to find the location of remote controller receiver).
When you properly press the button on the remote controller, you will hear ring sound from the indoor unit.
|
|
| • | The signal may not be received well of electronic lighting style fluorescent lamps such as inverter fluorescent | |
|
|
| |||
|
|
| |||
NOTE |
| lamps are in the same space. | |||
• | If other electrical products operate by the remote controller, call your nearest contact center. | ||||
|
|
|
Battery changing time
When the battery is exhausted,( )will be displayed in the remote controller display. When the icon appears, change the batteries. The remote controller requires two 1.5V AAA type batteries.
Storing the remote controller
When you do not use the remote controller for a long time, remove the batteries from the remote controller and store it in the remote controller holder.
Inserting the batteries
1. Open the battery cover.
ffPush the ( ) part in the direction of the arrow and lift up the cover.
2. Insert the batteries.
ffCheck and match the (+),
3. Close the battery cover.
ffMatch the cover and bottom part of the remote controller and press it until you hear click sound.
• Make sure that water is not allowed to enter the remote controller.
CAUTION
|
|
| • There is a possibility that the air conditioner will not operate by remote controller near strong light such as a |
|
|
| |
|
|
| |
|
|
| |
NOTE | fluorescent lamp or neon sign. In this case, use the remote controller in front of the remote controller receiver | ||
|
|
| of the indoor unit. |
• If other electrical products are operated by the remote controller, call your nearest service center.
01 PREPARATION
ENGLISH-19
PAC MIRAGE