Safety Precautions

The following safety precautions must be taken when using your air conditioner.

WARNING

Risk of electric shock. • Can cause injury or death. • Disconnect all

remote electric power supplies before servicing, installing or cleaning.

 

•This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.

INSTALLING THE UNIT

POWER SUPPLY LINE, FUSE OR CIRCUIT BREAKER

◆The unit should not be installed by the user. Ask the dealer or authorized company to install the units except room air conditioners for the U.S.A and Canada area.

◆If the unit is installed improperly, water leakage, electric shock or fire may result.

◆The air conditioner must be installed in accordance with national wiring regulations and safety regulations wherever applicable.

◆Mount with the lowest moving parts at least 2.5 m above the floor or grade level. (If applicable)

◆The manufacturer does not assume responsibility for accidents or injury caused by an incorrectly installed air conditioner. If you are unsure about installation, contact an installation specialist.

◆When installing the built-in type air conditioner, keep all electrical cables such as the power cable and the connection cord in pipe, ducts, cable channels e.t.c to protect them against liquids, outside impacts and so on.

◆If the power cord of this air conditioner is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

◆The unit must be plugged into an independent circuit if applicable or connect the power cable to the auxiliary circuit breaker. An all pole disconnection from the power supply must be incorporated in the fixed wiring with a contact opening of >3mm.

◆Do not use an extension cord with this product.

◆If the unit is equipped with a power supply cord and a plug, the plug must be accessible after installation.

◆This appliance must be installed accordance with the national wiring regulations.

E-26