NEO:6
mode
You can play back 2 channel sound over 6.1 channel when enjoying music or a movie.
REMOTE CONTROL
Press NEO:6 MODE button.
•Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
To set sound image of centre speaker
If TV (or screen) is installed high on a wall, you can raise the sound image of the centre speaker to compensate.
1Press SETUP/MENU button, and then press ENTER
button.
•“SETUP MODE” appears on the display and goes into Setup Mode.
2 Press 
button to select the “NEO:6 MODE”, and then press ENTER button.
• “CEN : IMG : 2” appears on the display.
3Press …† button to set the sound image you want.
• You can set the sound image from 0 to 5.
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button. “SETUP OFF” appears on the display and Setup Mode is exited.
NEO : 6 Mode
This mode decodes 2 channel signals to high precision digital matrix decoder. DTS NEO:6 decoder discretes 2 channel sound to discrete 6.1 channel sound.
• MUSIC : NEO:6 MUSIC mode is optimized for music playback
• CINEMA : NEO:6 CINEMA mode is optimized for movie playback.
| • NEO:6 mode can be used with DTS and Dolby Digital multi channel signals. |
42 | • Pro Logic works only for PCM audio signals with sampling frequency of |
32KHz, 44KHz or 48KHz. |
GB
MAIN UNIT
1Press SURROUND button briefly to select “NEO:6” mode.
•Each time you press this button, DPLIIx ➝ NEO:6 ➝ SFE ➝ STEREO will be selected in turn.
2 Press SELECT( | , | ) button. |
| |
|
|
| ||
• Each time you press this button, MUSIC ➝ CINEMA will be selected in turn. | OPERATION | |||
|
|
| ||
To set sound image of centre speaker | ||||
| ||||
|
|
|
| |
If TV (or screen) is installed high on a wall, you can raise the sound image of the centre speaker to compensate.
1Press SETUP button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
2Press FUNCTION button to select the “NEO:6 mode”.
3Press SURROUND button.
• “CEN : IMG : 2” appears on the display.
4Press SELECT( 
, 
) button to set the sound image you want.
• You can set the sound image from 0 to 5.
To exit setup mode
•Wait for about 5 seconds or press SETUP button.
“SETUP OFF” appears on the display and Setup Mode is exited.
• You can use this function to set the sound image of centre speaker only via the main unit.
43
