Samsung AV-R710R/ELS manual Connecting the speakers, Subwoofer function, √ Connecting Speaker Wire

Connecting the speakers

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

GB

ACTIVE SUBWOOFER (BUILT-IN POWER AMPLIFIER)

PS-AW710

FRONT (R)	FRONT (L)	SURROUND(R) SURROUND(L) SURROUNDBACK
PS-AF710	PS-AF710	PS-AR710	PS-AR710	PS-AB710

SL SR

SYSTEM MODEL NAME : HT-AS710

MAIN UNIT	AV-R710
FRONT SPEAKER	PS-AF710
CENTRE SPEAKER	PS-AC710
SURROUND SPEAKER	PS-AR710

CONNECTIONS

MAIN UNIT

AV-R710

CENTRE

PS-AC710

Position of AV Receiver

•Place AV Receiver on a dedicated stand or rack.

Front Speakers

•Place these speakers in front of your listening position, facing inwards (about 45°) toward you.

•Place the speakers so that their tweeters will be at the same height as your ears.

•Align the front face of the front speakers with the front face of the centre speaker or place them slightly in front of the centre speaker.

Centre speaker

•It is best to install it at the same height as the front speakers.

•You can also install it directly over or under the TV.

Subwoofer

•The position of the subwoofer is not so critical. Place it anywhere you like.

Surround Speakers

•Place these speakers behind your listening position.

•If there isn't enough room, place these speakers so they face each other.

•Place them about 60 to 90cm (2 to 3feet) above your ears, facing slightly downward.

❈Unlike the front and centre speakers, the surround speakers are used to handle mainly sound effects and sound will not come from them all the time.

Surround Back Speaker

•Place it so it faces forward towards the back of the listener.

•Place the surround back speaker about 70 cm to 1 m (2.3~3.3feet) above surround speakers, facing slightly downwards.

• When you attach the speakers to a wall, make sure to

fasten them tightly so they do not fall off.

SURROUND BACK SPEAKER	PS-AB710
ACTIVE SUBWOOFER	PS-AW710

Subwoofer function

Active subwoofer with integrated 150W amplifier provides rich bass sound.

1	Connect the SW OUT terminal of the amplifier (AV-R710) to the INPUT
	terminal of the subwoofer speaker.
2	Press the POWER button on the rear side of the subwoofer to turn
	the power on.
3	Using the subwoofer’s VOLUME control, you can set the desired bass level
	(See pages 36-37 "Setting Speaker Level" to set the subwoofer level in the menu).

√Connecting Speaker Wire

1 Release the speaker port by	2 Insert the end of the speaker	3 Fasten the speaker port by
turning it counterclockwise.	wire into the speaker port.	turning it clockwise.

	• Keep the subwoofer speaker out of reach of children to	• Never touch speaker terminals while the power is on.
Caution
	prevent them from inserting their hands or objects	Doing so could result in electric shock.
	into the duct (hole) of the subwoofer speaker.	• Make sure the polarities (+ and -) are correct.

10 11