Setting
DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
√ 
REMOTE CONTROL
1 Press SETUP/MENU button, and then press ENTER button.
•“SETUP MODE” appears on the display and goes into Setup Mode.
2Press 
button to select the “DRC”, and then press
ENTER button.
• “DRC:STD” appears on the display.
3 Press …† button to set the DRC.
•Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN
will be selected in turn.
To exit setup mode
•Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
Using the DRC button
Press DRC button.
•Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN will be
selected in turn.
GB
MAIN UNIT
1Press SETUP button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
2 Press FUNCTION button to select the “DRC SETUP”. | OPERATION | |
3 Press SURROUND button. | ||
| ||
• “DRC : STD” appears on the display . |
| |
4 Press SELECT( , ) button to set DRC. |
| |
• Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN |
| |
will be selected in turn. |
|
To exit setup mode
•Wait for about 5 seconds or press SETUP button.
“SETUP OFF” appears on the display and the unit Setup Mode is exited.
Setting DRC
•STD : Sets DRC effect to standard.
•MAX : Sets DRC effect to maximum.
•MIN : Sets DRC effect to minimum.
30 | 31 |
