Cleaning and maintenance

Cleaning the humidification filter

When the appliance is not cleaned for a long time, sediment powder will form on the humidification hydraulic turbin, so clean the filter frequently.

1.While the appliance is switched off, detach the upper cover(①) and lift off the water bottle from water bottle box(②).

2.Detach the side cover from the appliance by gripping and pulling out (③) the tray handle on bottom right of the appliance and then lift up (④) the humidification hydraulic turbin in the arrow direction. Be careful not to drop water from the humidification hydraulic turbin.

①Upper cover

②

Water bottle

 

Humidification hydraulic turbine

④

③

Tray Handle

3.Grip the the part marked 'Back' on the humidification hydraulic turbin and press the fastener(6 places) in the arrow direction to detach and then pull out the humidification filter.

-- When reassembling the humidification hydraulic turbin, repeat the assembling procedure in reverse order.

4.Clean the humidification filter by soaking it in water. Then press the filter gently with hands and leave it to dry in the shade.

-- Dissolve detergent in lukewarm water and put the filter in the water for 20~30 minutes. Then press the filter gently with hands to clean.

-- Rinse the filter with clean water to thoroughly remove the detergent or pollutant in the filter. (If the filter is not washed clean, it may produce an odor.)

-- After cleaning the filter, leave the filter to dry in the shade.

18

ACR PAPER-AR_IB_05556A-00_EN.indd 18

2015-07-01 오전 10:18:10