Troubleshooting
Problem |
|
|
|
| Solution |
| • Check if the hydrulic turbin fits correctly. When putting the turbin into the appliance, the side | ||||
|
| with toothed wheel should look forward. | |||
| • Check if it is electrical noise. The electrical noise may be generated during the ion production. | ||||
|
| Therefore, do not worry about malfunction with this noise. | |||
Strange noise is generated. | • Check if it is mechanical noise. Check if the hydraulic turbine and tray are dirty with white | ||||
| powder. Purchase a new water purification filter and replace it. Clean the humidification | ||||
|
| hydraulic turbine and tray on a regular basis. Especially, when there is white powder around the | |||
|
| groove of the humidification hydraulic turbine gear part, clean it with a soft brush as the white | |||
|
| powder causes a noise. | |||
| • If you are using the humidification function, water in the tank may cause the sound. Do not | ||||
|
| worry, there is no problem with the product. | |||
Tray is not aligned properly | • Remove the tray and make sure that humidification hydraulic turbine is properly inserted | ||||
| to the groove on the tray. Then put the tray back to its position. (Refer to the‘Cleaning and | ||||
after reassembling it. |
| ||||
| maintenance’ section.) | ||||
|
| ||||
Error is indicated. | • |
|
|
| messagess are displayed on the timer diplay of the control panel. In this case, the |
|
| ||||
| appliance has a certain problem, so contact the service center. | ||||
|
| ||||
24
ACR |