Samsung BD-P1400/EUR, BD-P1400/XEC manual Connecting to a Tvvideo

CONNECTING TO A TV(VIDEO)

1.Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the VIDEO (yellow) / AUDIO (red and white) IN terminals of your TV.

2.Turn on the Blu-ray Disc Player and TV.

3.Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears on the TV screen.

•If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUT SEL. button on the remote control and select VIDEO as the external source of the TV.

● CONNECTIONS

Yellow Red White

M Noise may be generated if the audio cable placed too close to the power cable.

If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 26~29)

The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of your TV.

If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the Blu-ray Disc Player.

The VIDEO source is always output in 576i/480i resolution regardless of the set resolution in the SETUP menu. (See page 40)

English _25