Samsung BD-P1400/XEC, BD-P1400/EUR manual PCM Down Sampling, Dynamic Compression, Hdmi

system setup

PCM Down Sampling

•On : Select this when the Amplifier connected to the player

is not 96KHz compatible. 96KHz signals will be down		Photo	Language Setup	Digital Output	: PCM
converted to 48KHz			Audio Setup	PCM Down Sampling : OnOn
		Setup
• Off : Select this when the Amplifier connected to the player	No Disc
					Off
			Display Setup	Dynamic Compression : On
is 96KHz compatible. Signals will be output without any			HDMI Setup	Speaker Setup
changes.			Parental Setup
			System Upgrade

M Even when PCM Down Sampling is set to Off, some discs will only output downsampled audio through the coaxial and optical digital outputs.

HDMI

•If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), you should set Digital Audio to PCM.

•If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down Sampling to On.

Dynamic Compression

This is only active when a Dolby Digital signal is detected.				Digital Output	: PCM
• Off : You can enjoy the movie with the standard Dynamic		Photo	Language Setup	PCM Down Sampling	: On
Range.		Setup	Audio Setup	Dynamic Compression : OnOn
	No Disc
					Off
• On : When Movie soundtracks are played at low volume or			Display Setup	Speaker Setup
			HDMI Setup
from smaller speakers, the system can apply appropriate
			Parental Setup

compression to make low-level content more intelligible and	System Upgrade
prevent dramatic passages from getting too loud.

36_ system setup