troubleshooting
Before requesting service, please check the following.
PROBLEM |
| SOLUTION |
|
|
|
No operations can be performed with | • | Check the batteries in the remote control. They may need replacing. |
the remote control. | • | Operate the remote control at a distance of no more than 6.1m. |
| ||
| • | Remove batteries and hold down one or more buttons for several minutes |
|
| to drain the microprocessor inside the remote control to reset it. Reinstall |
|
| batteries and try to operate the remote control again. |
|
|
|
Disc does not play. | • | Ensure that the disc is installed with the label side facing up. |
| • | Check the region number of the BD/DVD. |
|
|
|
5.1 channel sound is not being | • | 5.1 channel sound is reproduced only when the following conditions are |
reproduced. |
| met. : |
|
| 1. The |
|
| 2. The disc is recorded with 5.1 channel sound. |
| • | Check whether the disc being played has the “5.1 ch” mark on the |
|
| outside. |
| • | Check if your audio system is connected and working properly. |
| • | In a SETUP Menu, is the Audio Output set to Bitstream? |
|
|
|
Disc Menu doesn’t appear. | • | Check if the disc has a Menu. |
|
|
|
The icon appears on screen. | • | The features or action cannot be completed at this time because: |
|
| 1. The BD/DVD’s software restricts it. |
|
| 2. The BD/DVD’s software doesn’t support the feature (e.g., angles) |
|
| 3. The feature is not available at the moment. |
|
| 4. You’ve requested a title or chapter number or search time that is out of |
|
| range. |
|
|
|
Play mode differs from the Setup Menu | • | Some of the functions selected in the Setup Menu may not work properly |
selection. |
| if the disc is not encoded with the corresponding function. |
|
|
|
The screen ratio cannot be changed. | • | The Screen Ratio is fixed on your BD/DVDs. |
|
|
|
No audio. | • | Make sure you have selected the correct Digital Output in the Audio |
|
| Options Menu. |
|
|
|
The screen is blocked | • | Press the $ button (in front panel) for more than 5 seconds with no disc |
|
| inside. All settings will revert to the factory settings. |
|
|
|
60_ troubleshooting