Samsung BD-P1400/EUR, BD-P1400/XEC manual Setting UP the Speaker Options

SETTING UP THE SPEAKER OPTIONS

If you have connected this player to an Amp/Receiver or Home theater via the 5.1 channel Analog outputs you need to set the Speaker Options for the best sound.

1.With the unit in Stop mode, press the MENU button.

2.Press the ▲▼ buttons to select Setup, then press the OK or ► button.

3.Press the ▲▼ buttons to select Audio Setup, then press the OK or ► button.

Photo	Language Setup
	Audio Setup
Setup

No Disc

Display Setup

HDMI Setup

Parental Setup

System Upgrade

		PCM Down Sampling : On
Photo	Language Setup	Dynamic Compression : On
	Audio Setup	Speaker Setup
Setup

No Disc

Display Setup

HDMI Setup

Parental Setup

System Upgrade

● SYSTEM SETUP

4. Press the ▲▼ buttons to select Speaker Setup, then							PCM Down Sampling : On
	press the OK or ► button.			Speaker Setup
			Photo			Language Setup	Dynamic Compression : On
5.	Press the ▲▼◄► buttons to select the desired Speaker,	No Disc		Setup		Audio Setup	Speaker Setup
					L		R
	then press the OK button.			Small		Display Setup	Small
						Parental SetupSmall
6.	When done, use the ▲▼◄► buttons to select Save, then			LS		LFE	RS
						System Upgrade
				Small			Small
	press the OK button.					USER
						Save	Cancel

If you don’t want to save your work, use the ▲▼◄►	a Test Tone	s SELECT	² RETURN
buttons to select Cancel, then press the OK button.

M  Press the RETURN or ◄ button to return to the previous menu.

Speaker Setup
Front (L, R)	Large, Small
Center (C)	Large, Small, None
Surround (LS, RS)	Large, Small, None
Subwoofer (SW)	LFE, None

Speaker

•Large : Delivers full bandwidth sound with bass below 100 Hz.

•Small : If LFE is on, bass below 100 Hz will be outputted through a Subwoofer instead of the speakers. If LFE is off and the Front Speaker is set to Large, sound will be outputted through the Front Speaker.

•None : Select to disable the speakers.

Subwoofer Speaker

•LFE : Select to use the subwoofer speaker.

•None : Select to disable the subwoofer speaker.

(This option can only be selected when the Front (L+R) speakers are set to Large.)

Press the RED(A) button

•A test tone will be sent to L C R RS

LS LFE in order so you can make sure the speakers are set up correctly.

•To end the test tone, press the RED (A) button again.

•The test tone can only be activated when no discs are in the unit.

English _37