Samsung BDH5900 user manual Appendix, Troubleshooting, AllShare function

Appendix

		Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM		SOLUTION
No operation can be	●●	Check the batteries in the remote control. They may need replacing.
performed with the	●●	Operate the remote control at a distance of no more than
remote control.		20 feet from the player.
	●●	Remove batteries and hold down one or more buttons
		for several minutes to drain the microprocessor inside the
		remote control to reset it. Reinstall the batteries and try to
		operate the remote control again.
Disc does not play.	●●	Ensure that the disc is installed with the label side facing up.

●●Check the region number of the Blu-ray Disc/DVD.

Disc Menu does not appear. ●● Ensure that the disc has disc menus.

The prohibition	●●	This message appears when an invalid button is pressed.
message appears on	●●	The Blu-ray Disc/DVD’s software doesn’t support the
the screen.		feature (e.g., angles).
	●●	You’ve requested a title or chapter number or search time
		that is out of range.
Play mode differs	●●	Some of the functions selected in the Setup Menu may
from the Setup Menu		not work properly if the disc is not encoded with the
selection.		corresponding function.
The screen ratio	●●	The Screen Ratio is fixed on your Blu-ray Disc/DVD.
cannot be changed.	●●	This is not a problem with the player.
No audio.	●●	Make sure you have selected the correct Digital Output in
		the Audio Options Menu.
The screen is blank.	●●	If the HDMI output is set to a resolution your TV cannot support
		(for example, 1080p), you may not see a picture on your TV.
	●●	Press the ■ button (on front panel) for more than 5
		seconds with no disc inside. All settings will revert to the
		factory settings.
	●●	When the factory default settings are restored, all stored
		user BD data is deleted.

PROBLEM		SOLUTION
Forgot password	●●	Press the ■ button (on the front panel) for more than
		5 seconds with no disc inside. All settings including the
		password will revert to the factory settings.
		Don’t use this unless absolutely necessary.
	●●	When the factory default settings are restored, all stored
		user BD data is deleted.
The picture is noisy or	●●	Make sure that the disc is not dirty or scratched.
distorted	●●	Clean the disc.
No HDMI output.	●●	Check the connection between the TV and the HDMI jack
		of the player.
	●●	Check if your TV supports 480p, 720p, 1080i, or 1080p
		HDMI input resolutions.
Abnormal HDMI	●●	If random noise appears on the screen, it means that TV
output screen.		does not support HDCP (High-bandwidth Digital Content
		Protection).
If you experience	●●	Go to the contents and find the section of the user
other problems.		manual that contains the explanations regarding the
		current problem, and follow the procedure once again.
	●●	If the problem still cannot be solved, please contact your
		nearest Samsung authorized service center.
AllShare function
I can see folders shared	●●	AllShares shows only files corresponding to the Image,
through AllShare, but I		Music, and Movie categories. Files that do not correspond
cannot see the files.		to these categories are not displayed.
Video is played	●●	Check if the network is stable.
intermittently.	●●	Check if the network cable is properly connected and if
		the network is overloaded.
	●●	The wireless connection between the AllShare compatible
		device and the player is unstable.
		Check the connection.
AllShare connection	●●	The IP address under the same subnetwork should be
between Player and		unique. If they are not, IP interference can cause this
PC is unstable.		phenomenon.
	●●	Check if you have a firewall enabled.
		If so, disable the firewall function.

24