Checking the Digital-Signal Information
You can get information about the signal status.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER 
button.
Channel
Channel Mode | : Added Ch. |
Fine Tune |
|
Signal Information | ► |
LNA | : Off |
2.Press the ▲ or ▼ button to select “Signal Information”, then press the
ENTER 
button.
3.Press the EXIT button to exit.
➣If the signal status is poor, the “No signal.” message is displayed.
➣While viewing a Digital channel, this function can be selected.
| Signal Information |
| ||
Frequency | : 482000 KHz |
| ||
Service ID | : 0401 |
|
| |
Multiplex | : (TSID 0004, ONID 20fa) | |||
Network | : (ID 20fa) |
| ||
Bit error level |
|
|
| 0 |
|
|
| ||
Signal Strength |
|
|
| 88 |
|
|
| ||
|
|
|
|
|
|
| OK |
| |
|
|
|
| |
|
| Enter | Return | |
|
|
|
|
|
LNA (Low Noise Amplifier)
If the TV is operating in a
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER 
button.
2.Press the ▲ or ▼ button to select “LNA”, then press the ENTER 
button.
Channel
Fine Tune
Signal Information
LNA: Off ►
3.Press the ▲ or ▼ button to select “Off” or “On”. Press the ENTER 
button.
4.Press the EXIT button to exit.
➣ While viewing an Analogue channel, this function can be selected.
Channel
Fine Tune
Signal Information
LNA | : On | ► |
| Off |
|
On
