Samsung PC550-NA, BN68-02900A-05, Series r5+ 540 Spdif Output, Sound Reset OK / Cancel, Time

✎✎When Speaker Select is set to TV Speaker xx TV Speaker: On, External Speaker: On

✎✎If there is no video signal, both speakers will be mute.

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital sound, reducing interference going to speakers and various digital devices such as an A/V Receiver/Home theater.

■■ Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.

■■ Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

Setup Menu

¦¦ Setting the Time

OO MENUm→ Setup → Time → ENTERE

−− Manual: Set the current time manually.

✎✎ Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.

Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm manually.

✎✎ Available only when Clock Mode is set to Manual.

✎✎ You can set the Month, Day, Year, Hour, and Minute directly by pressing the number buttons on the remote control.

DST (Daylight Saving Time) (Off / On): Switches the Daylight Saving Time function on or off.

✎✎ This function is only available when the Clock Mode is set to Auto.

Time Zone: Select your time zone.

✎✎ This function is only available when the Clock Mode is set to Auto.

¦¦ Using the Sleep Timer

OO MENUm→ Setup → Time → Sleep Timer →

ENTERE

■■ Sleep Timer: Automatically shuts off the	SLEEP
TV after a preset period of time (30, 60, 90,
120, 150 and 180 minutes).
✎✎ To cancel the Sleep Timer, select
Off.

03 Basic Features

Time

■■ Clock: Setting the clock is for using various timer features of the TV.

OO The current time will appear every time you press the INFO button.

✎✎ If you disconnect the power cord, you have to set the clock again.

Clock Mode (Auto / Manual)

−−Auto: Set the current time automatically using the time from a digital channel.

✎The antenna must be connected in order to set✎

the time automatically.

¦¦ Setting the On / Off Timer

OO MENUm→ Setup → Time → Timer 1→ ENTERE

You can set the TV to turn on automatically at a preset time.

■■ Timer 1 / Timer 2 / Timer 3: Three different on / off timer settings can be made. You must set the clock first.

Timer 1

On Time

▲
Inactivate			00			00				am
▼
Off Time
Inactivate			00			00				am
Volume	Source				Antenna				Channel
20			TV			Cable				1
Repeat		Sun	Mon		Tue	Wed		Thu		Fri	Sat
Once
		LMove		UAdjust			EEnter			RReturn

English 21