Samsung Series r5+ 550 Connecting to an Antenna, Plug & Play Initial Setup, VHF/UHF Antenna

Getting Started

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically. ✎✎Connecting the power cord and antenna.

✎✎The PDP device may interfere with an amateur radio or AM radio.

VHF/UHF Antenna

Antenna Cable (Not Supplied)

Cable

or ANT OUT

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Input source is set to TV.

✎✎To return to the previous step, press the Red button.

1	Selecting a language
2	Selecting Store Demo
	or Home Use
3	Selecting an antenna
4	Selecting a channel
5	ModeSetting the Clock
6	Viewing the HD
	Connection Guide.
7	Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTEREbutton.		POWER
Select the desired OSD (On Screen Display) language.		P
Press the ◄ or ► button, then press the ENTEREbutton.
y	Select the Home Use mode. Store Demo mode is for retail
	y environments.

yy To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select Air, Cable or Auto.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the channel source to memorize. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Program (p. 14).

✎✎Press the ENTEREbutton at any time to interrupt the memorization process. Set the Clock Mode automatically or manually.

yy Auto: Allows you to select DST (Daylight Saving Time) mode and time zone

yy Manual: Allows you to manually set the current date and time (p. 21). The connection method for the best HD screen quality is displayed.

Press the ENTEREbutton.

If You Want to Reset This Feature...

MENUm→ Setup → Plug & Play → ENTERE

8 English