Samsung CE1151T/LIB, CE1151T/ELE manual Adjusting the Cooking Time Using the Pro Steam Cook Feature

Adjusting the Cooking Time Using the Pro Steam Cook Feature

GB

Like traditional cooking, you may find that, depending on the food’s characteristics or your tastes, you have to adjust the cooking times slightly. You can:

•Check how cooking is progressing at any time simply by opening the door

•Increase or decrease the remaining cooking time

1.To increase the cooking time of your food, press the

+30s( ) button once for each 30 seconds that you wish to add.

•Example: To add three minutes, press the +30s( )

button six times.

2. During the cooking, to increase or decrease the cooking time of your food, turn the Jog Dial right or left.

+ 30s

The following procedure explains how to cook food.

☛ALWAYS check your cooking settings before leaving the oven unattended.

caution￿￿

•Never use this steamer with a product of different model. It may cause a fire or fatal damage to the product.

•When you use this steamer, pour at least 200ml water before use.

If the amount of water is less than 200ml, it may cause incomplete cooking, or may cause a fire or fatal damage to the product.

•Take care when you take out the steamer after cooking time. There is a danger of scald.

•The steamer should be used only in the mode of "Pro steam cook"manual and "Auto prosteam cook".

•When you use the Steamer, the steam cover and steam plate should be set pefectly right. (Please refer to the instruction)

The egges or the chasenut would be exploding without setting the steam cover and steam plaste instructed on the Instruction book.

1.Pour about 500ml water into the steam water bowl.

2.Place the steam plate on the steam water bowl completely, and put food on the steam plate.

3.Cover with the steam cover, and open the door.

4.Place the steamer in the center of the turntable. Close the door.

5. Press the Pro Steam Cook() button.

6. Set the cooking time by turning the Jog Dial. The maximum time is 60 minutes.

+ 30s

7.Press the Start( ) button.

12