Samsung CLX-6260FW, CLX6260FW To change the menu options Press Fax, Stamp RCV Name, Drpd Mode

Fax

To change the menu options:

• Press (fax) > (Menu) > Fax Setup > Receiving on the control panel.

•Or press Setup > Machine Setup > Next > Default Setting > Fax Default on the touch screen.

•Or press Setup > Machine Setup> Next > Fax Setup on the touch screen.

Item	Description
Receive Mode	Selects the default fax receiving mode (see "Changing
	the receive modes" on page 297).
Ring To Answer	Specifies the number of times the machine rings before
	answering an incoming call.
	Automatically prints the page number, and the date
Stamp RCV Name	and time of reception at the bottom of each page of a
	received fax.
	Initiates fax reception from an extension phone
	plugged into the EXT socket on the back of the
Rcv Start Code	machine. If you pick up the extension phone and hear
	fax tones, enter the code. It is preset to *9* at the
	factory.
Auto Reduction	Automatically reduces an incoming fax page to fit the
	size of the paper loaded in the machine.
Discard Size	Discards a specific length from the end of the received
	fax.

Item	Description
	Enables a user to use a single telephone line to answer
	several different telephone numbers. You can set the
DRPD Mode	machine to recognize different ring patterns for each
	number. This setting may not be available depending
	on your country (see "Receiving faxes using DRPD
	mode" on page 299).
	Prints the received fax data on both sides of the paper.
	You can save the paper usage.
	• Off: Prints only one side of the paper.
Duplex Print	• Long Edge: Prints both sides of the paper; however,
	the binding will be the long edge.
	• Short Edge: Prints both sides of the paper; however,
	the binding will be the short edge.

3. Useful Setting Menus 234