Samsung DVD-HR775A/XEN manual Drc, This is only active when a Dolby Digital signal is detected

system setup

DRC

This is only active when a Dolby Digital signal is detected.

•On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

•Off : You can enjoy the movie with the standard Dynamic Range.

NICAM

HDD & DVD RECORDER						Audio
HDD
	Library	Digital Output			: PCM
		DTS			: Off
Timer Record
		DRC		Off	: On
Disc Manager
		NICAM		On
	Setup
mMOVE	sSELECT		rRETURN			eEXIT

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound by setting NICAM on or off.

•On : NICAM mode

•Off : Only set at this position to record the standard mono sound during a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions.

HDD & DVD RECORDER						Audio
HDD
		Digital Output			: PCM
	Library
Timer Record		DTS			: Off
		DRC			: On
Disc Manager		NICAM		Off	: On
	Setup			On
mMOVE	sSELECT		rRETURN			eEXIT

42_ system setup