Setting Up the Parental Control
Setting Up the Rating Level
1.With the unit in Stop mode, press the MENU button.
2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
The player is locked ( 
).
3.Select Parental Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4.Enter your password.
The Parental Setup screen appears.
5.Select Rating Level using UP/DOWN buttons, and press ENTER or RIGHT button.
6.Select the Rating Level you want using UP/DOWN buttons.
For example, if you select up to Level 6, discs that contain Level 7, 8 will not play.
-To cancel the Rating Level, select No using RIGHT or ENTER in Use Password.
e.g) Setting up in LEVEL6.
About the Change Password;
-Highlight Change Password using UP/DOWN buttons.
-Press ENTER button.
The Change Password screen appears.
-Enter your new password. Enter the new password again.
Note
•How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button.
•If you have forgotten your password, see Forgot Password in the Troubleshooting Guide.
Firmware upgrade
Introduction
Samsung will often support the software upgrade to improve the performance of this unit to the latest status, through Samsung Internet Site (www.samsung.com).
Because the specially new mpeg4 codec continues and it is appearing. What improvements are made depends on the upgrade software you are using as well as the software that your
How to make an upgrade disc
Write the downloaded file onto a blank
1.You have to download a new file through Download Center of Samsung Internet Site (www.samsung.com).
2.Write the file to Disc using
Note
•File System
•Character set ISO 9660
•Finalized, single session
•Write speed low
Upgrade procedure
1.Press OPEN/CLOSE to open the disc tray.
2.Insert the upgrade
3.Press OPEN/CLOSE to close the disc tray.
Firmware upgrade appears on the display
4.Press the ENTER button.
Firmware upgrade starts
5.In the middle of the writing, the tray will open automatically. After taking out the disc, please wait for about 2 minutes.
6.If the unit was successfully updated, the unit will turn off and on after closing the tray automatically. When the unit turns on, this screen will display.
7. Select the desired language.
Note • If the “Select Menu Language” does't appears, please contact to “Samsung Service Center”.
•Do not press any button and unplug the power code during upgrade.
•The upgrade procedure may change, refer to the web site (www.samsung.com).
| ||
|
|
|
