Samsung DVD-P245/XEE manual Choosing a Connection, Before Connecting the DVD Player

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and other components.

Before Connecting the DVD Player

•Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

•If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.

•Refer to the owner’s manual of the additional components you are connecting for more information on those particular components.

Connection to an Audio System

Method 1 Method 2

AUDIO

SYSTEM

2ch Amplifier	Dolby Digital Decoder
Audio Input Jacks	Digital Audio Input Jack

OR

DVD
Player		OPTICAL
	R	L
	ANALOG AUDIO OUT	COAXIAL

Analog Audio Output Jacks Digital Audio Output Jack

Choosing a Connection

Connection to a TV (For Video)

TV (Normal, Widescreen, Projection, etc..)

	Method 1	Method 2	Method 3	Method 4	Method 5
	Good	Better	Best	Best	Optimum
Basic Audio	picture	picture	picture	picture	picture

TV

AV	S-Video	Scart
		Cables	Video
Cable	Cable	(not	Cables
		supplied)
	OR	OR	OR

DVD
Player	Pr	Pb	Y	Pr	Pb	Y
R	L

	ANALOG AUDIO OUT		VIDEO OUT		S-VIDEO OUT			COMPONENT VIDEO OUT		COMPONENT VIDEO OUT
Audio Output		Video Output		S-Video		SCART Jack	Component Video		Component Video
	Jacks		Jack		Jack			Jacks		Jacks
								(Interlace)		(Progressive)

Method 1

DVD Player + TV with Video Input Jack

(The Video Output in Setup Menu must be set to S-Video or SCART Output.)

Method 2

DVD Player + TV with S-Video Input Jack

(The Video Output in Setup Menu must be set to S-Video.)

Method 3

DVD Player + TV with Scart Input Jacks (Audio & Video)

(The Video Output in Setup Menu must be set to SCART Output.)

Method 4

DVD Player + TV with interlace Scan Component Video Jacks

(The Video Output in Setup Menu must be set to Component (I-SCAN).)

Method 5

DVD Player + TV with Progressive Scan Component Video Jacks.

(The Video Output in Setup Menu must be set to Component (P-SCAN).)

•If you want to convert Video Output to Progressive Scan, you have to select Component (P-SCAN) Video Output in the Setup Menu. Then you have to select “Yes” within 10 seconds.

•If Component (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video will not work.

Important Note

•Consult your TV User’s Manual to find out if your TV supports Progressive Scan.

If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.

•Depending on your TV, the Method of connection may differ from the illustration above.

ENG-10 ENG-11