Setting up the Audio
Options
You can connect the DVD Recorder to an external amp or Home Theater.
Allow you to setup the Audio device and sound status depending on the audio system in use.
5 Press the …† buttons to select the desired item, then press the OK or √ button.
■Press the RETURN or œ button to return to the previous menu.
NOTE
Press the MENU button to exit the menu.
1 With the unit in Stop mode/No Disc mode, press the MENU button.
No Disc |
| Timer Record | |
Programme | Video Plus+ |
| √ |
Setup | Timer Record |
| √ |
|
|
| |
| Video Plus+ Extended : Off | √ | |
MOVE | OK | RETURN | EXIT |
2 Press the …† buttons to select Setup, then press the OK or √ button.
1.PCM : Select this when you have no equipment that can decode Dolby Digital (or
2.Bitstream : Output Dolby Digital (or
■ Digital output setting is equally applied to
Setup ystemS
No Disc |
| Setup |
Programme | System | √ |
Setup | Clock Set | √ |
Language |
| |
| √ | |
| Audio | √ |
| Video | √ |
NOTE
both Dolby Digital and
| Parental Control |
| √ |
| Install |
| √ |
MOVE | OK | RETURN | EXIT |
3 Press the …† buttons to select Audio, then press the OK or √ button.
Audio setup menu will be displayed.
No Disc |
|
| Audio |
Programme | Digital Output | : PCM | √ |
Setup | DTS | : Off | √ |
Dynamic Compression | : On |
| |
| √ |
MOVE | OK | RETURN | EXIT |
4 Press the …† buttons to select the desired audio option, then press the OK or √ button.
No Disc |
|
| Audio |
Programme | Digital Output | PCM |
|
Setup | DTS | Bitstream |
|
| Dynamic Compression | : On | √ |
MOVE | OK | RETURN | EXIT |
■Be sure to select the correct Digital Output or you will hear no sound or loud noise.
DTS1. Off : Doesn’t output DTS signal.
Select this when your AV receiver or AV amplifier does not have DTS decoder.
2.On : Outputs DTS Bitstream via digital output when you play DTS track.
Select this only when your AV receiver (or AV amplifier) have DTS decoder.
■When DTS soundtrack is played, sound
does not output from AV Audio Output.
NOTE
Dynamic CompressionThis is only active when a Dolby Digital signal is detected.
1.Off : You can enjoy the movie with the standard Dynamic Range.
2.On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make
English