Samsung DVD-R120/SED Setting up Video Output Options, Available Video Output Jack, Component mode

System Setup

Setting up Video Output Options

You can enjoy high quality image through RGB or Component video connections.

1 With the unit in Stop mode/No Disc mode, press the MENU button.

No Disc		Timer Record
Programme	Video Plus+		√
Setup	Timer Record		√
	Video Plus+ Extended : Off		√
MOVE	OK	RETURN	EXIT

2 Press the …† buttons to select Setup, then press the OK or √ button.

No Disc			Setup
Programme	System		√
Setup	Clock Set		√
	Language
			√
	Audio		√
	Video		√
	Parental Control		√
	Install		√
MOVE	OK	RETURN	EXIT

3 Press the …† buttons to select Video, then press the OK or √ button.

Video setup menu will be displayed.

No Disc			Video
Programme	TV Aspect	: 16:9 Wide	√
Setup	3D Noise Reduction : Off		√
	Video Output	: Component √
MOVE	OK	RETURN	EXIT

4 Press the …† buttons to select Video Output, then press the OK or √ button.

	No Disc				Video
	Programme	TV Aspect		: 16:9 Wide	√
		3D Noise Reduction : Off
	Setup				√
		Video Output		: Component √
				Component
				RGB
	MOVE	OK	RETURN		EXIT
Component	Select this when the Recorder is connected
	to a TV with Component jack.
RGB	Select this when the Recorder is connected
	to your TV using SCART cable.

5 Press the …† buttons to select the desired item, then press the OK or √ button.

In Component mode, you can set video output to Progressive(P.SCAN) or Interlace, see page 37.

Available video output jacks are as follow.

Available Video Output Jack

	Setting mode	Component mode		RGB Mode
Output jack		P.SCAN off mode (Interlace mode)	P.SCAN on mode
Component Output		O	O	X
(Y, Pb, Pr)			(TV in progressive mode)
AV1 Scart	R, G, B	X	X	O
	Composite	O	X	X
AV2 Scart	(Composite)	O	X	O
Composite Video out		O	X	O
S-Video out		O	X	O

36- English