20_ connecting & setting up
connecting & setting up

ConneCting hDMi/DVi to a tV

Connecting to a tV with an hDMi Jack

HDMI (High Definition Multimedia Interface)
HDMI enables you to make a digital video and audio connection with a single cable. Using HDMI, the DVD
player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input
jack.
Using an HDMI- HDMI cable(not included) connect the HDMI OUT jack on the rear of the DVD Recorder to
the HDMI IN jack of your TV.
Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder appears on
your TV screen.
To hear audio on your TV when using HDMI, set the digital audio output to PCM (2 channel). (See page 34~35)
Depending on the HDMI device (TV/HDMI Receiver) you use, audio may not be supported.
If your TV does not support Dolby digital/DTS, Audio output is not available when you set the Digital output as
Bitstream or select DTS On in the Audio setup menu. In this case, set the digital audio output to PCM or DTS Off.
I
f you use an HDMI cable to connect a Samsung TV to the DVD recorder, you can operate the recorder using the TV
remote control. (This is only available with SAMSUNG TVs that support Anynet+(HDMI CEC).) (See page 38~39)
HDMI (High Definition Multimedia Interface)
HDMI enables you to make a digital video and audio connection with a single cable.
Using HDMI, the DVD Recorder transmits a digitial video and audio signal and displays a vivid picture on a TV having
an HDMI input jack.
Please check the ' logo (If your TV has an ' logo, then it supports Anynet+ function.)
Connect the HDMI cable to the DVD Recorder when it is in stop mode.
J
174 eng 18-26.indd 20 2008-7-12 11:06:49