4_ getting started
getting started
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Service is required when the apparatus
has been damaged in any way, such as the power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus. Service is also required if the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
Handling Cautions
Before connecting other components to this recorder, be sure to turn them all off.
Do not move the recorder while a disc is being played, or the disc may be scratched or broken, and the
recorder’s internal parts may be damaged.
Do not put a flower vase filled with water or any small metal objects on the recorder.
Be careful not to put your hand into the disc tray.
Do not place anything other than the disc in the disc tray.
Exterior interference such as lightning and static electricity can affect normal operation of this recorder.
If this occurs, turn the DVD Recorder off and on again with the POWEr button, or disconnect and then
reconnect the AC power cord to the AC power outlet. The recorder will operate normally.
Be sure to remove the disc and turn off the recorder after use.
Disconnect the AC power cord from the AC outlet when you don’t intend to use the recorder for long
periods of time.
Clean the disc by wiping in a straight line from the inside to the outside of the disc.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
Do not use benzene, thinner, or other solvents for cleaning.
Wipe the cabinet with a soft cloth.
Disc Handling
Use discs with regular shapes. If an irregular disc (a disc with a special shape) is
used, this DVD Recorder may be damaged.

Holding discs

Avoid touching the surface of a disc where recording is performed.

DVD-raM, DVD±rW and DVD±r

Clean with an optional DVD-RAM/PD disc cleaner. Do not use cleaners or cloths for CDs to clean DVD-
RAM/DVD±RW/DVD±R discs.
10)
11)
12)
13)
14)
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
174 eng 1-17.indd 4 2008-7-12 11:02:43