74_ reference

reference

TroubleshooTing (DVD)

PROBLEM EXPLANATION/SOLUTION
icon appears on the screen. You cannot use the operation or function due to one of the following reasons:
(1) Your DVD disc does not support the feature (for example, angles)
(2) You've requested a title, chapter, or scan time that is out of the correct range.
Play mode settings are different from the
settings configured with the Setting menu. The disc does not support all the selected functions.
In this case, some settings you configure on the Setting menu may not work properly.
Cannot change the aspect ratio. Aspect ratio is fixed on DVD disc.
No audio output.
Check whether you selected the correct digital output in the Audio Output Options menu.
No video or audio output.
The disc tray is ejected after 2 to 5 seconds.
Did you move your DVD Recorder suddenly from a cold place to a warm place?
In this case, do not connect the plug to the power outlet and wait for two hours.
Then insert the disc and try to play back again. It will work properly when condensation
has evaporated.
Angle operation does not work during
playback of a DVD disc.
Angle operation is available only when the disc contains images captured at different angles.
The disc revolves, but no image or bad
quality images are output.
• Check whether there is damage or foreign materials on your disc.
• Some discs with bad manufacturing quality may not be played back.
• If the scene changes from dark to bright suddenly, the screen may jitter temporarily,
but it is not defective.
Desired sound language and subtitle
language are not played.
Sound languages and subtitle languages are disc-specific.
Only the sound and subtitle languages contained on a DVD disc are available and
displayed on the disc menu.
No progressive output. Check whether you selected the corrent Progessive options in the Video Options.
The remote control doesn't work. • Point the remote control at the remote control sensor on your DVD Recorder. Operate
within distance. (15ft)
Remove obstacles between your DVD Recorder and remote control.
• Check whether the batteries are depleted.
Other problems • Read the table of contents and then find and read the sections describing your
problem, and follow the directions given.
• Turn the unit off and on.
• If your problem still persists, contact your nearest Samsung customer service.
No HDMI output. • Check that the Video output is HDMI enabled.
• Check the connection between the TV and the HDMI jack of the DVD Recorder.
• See if your TV supports this 480p/720p/1080i/1080p DVD Recorder.
Abnormal HDMI output screen. • If snow noise appears on the screen,it means that the TV does not support HDCP
(High-bandwidth Digital Content Protection).
HDMI output Jitter • Check if your TV system is setup correctly.
• Screen Jitter may occur when the frame rate is converted from 50Hz to 60Hz for
720p/1080i/1080p HDMI (High Definition Multimedia Interface)Output.
• Please refer to the user ’s manual of your TV.
174 eng 73-80.indd 74 2008-7-12 13:05:23