Connecting DVD Recorder

&VCR to the TV using the RF Cable

Connecting DVD Recorder

&VCR to the TV using the Audio/Video Cable

Note

Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables.

You can connect your DVD Recorder & VCR to the television using the Audio/Video cable if the appropri- ate input is available on the television. You thus:

• Obtain better quality sound and pictures

• Simplify the setting up procedure of your DVD

Recorder & VCR

1

Remove the aerial or network input cable from the

television.

 

 

 

 

 

 

 

 

 

 

 

 

2

Connect this cable to the 75Ω aerial jack marked

 

 

 

 

 

 

on the rear of your DVD Recorder & VCR.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Plug the RF Cable supplied into the

 

jack on

 

 

your DVD Recorder & VCR.

 

 

4 Plug the other end of the RF Cable into the connector previously used for the aerial on the television.

Regardless of the type of connection chosen, you must always connect the RF Cable sup-

Note plied. Otherwise, no picture will be visible on the screen when the DVD Recorder & VCR is switched off.

Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables.

1

Connect the RF Cable.

 

 

 

2

Connect one end of the Audio/Video cable to

the Video output and Audio L, R output jack on

 

 

the rear of the DVD Recorder & VCR.

 

 

 

3

Plug the other end into the appropriate

connector on the television.

 

 

 

Aerial

Aerial cable

Connections

RF Cable

RF cable

ANT IN

English - 17

Page 17
Image 17
Samsung DVD-VR330/XSG, DVD-VR330/XEC, DVD-VR330/HAC manual VCR to the TV using the RF Cable