Samsung DVD-VR330/XSG, DVD-VR330/XEC manual Progressive scan, Canceling the progressive scan

	■	The Quick Recording is set to Off as default.
	■	If this function is set to on, power consump-
Note		tion will be increased when the unit is pow-
		ered off.

Progressive scan

If your TV supports Progressive Scan, press the

P.SCAN button on the front of the DVD Recorder &

VCR to enjoy.

		Setting up the progressive scan
Setup
	1	In Stop mode, press the P.SCAN button on the
System		front of the DVD Recorder & VCR
			Press [Yes] to confirm Progressive scan mode.
			Otherwise, press [No].
				Yes	No

2	Press the œ √ buttons to select the Yes , and then
	press the OK button.
3	Set your TV to Progressive input (using TV remote
	control.)

■ Progressive setting is only available when

Note the DVD Recorder & VCR is in stop mode.

38 - English

	Canceling the progressive scan
1	In Stop mode, press the P.SCAN button on the
	front of the DVD Recorder & VCR

Press [Yes] to confirm Interlace scan mode.

Otherwise, press [No].

Yes No

2	Press the œ √ buttons to select the Yes , and then
	press the OK button.
3	Set your TV to Interlace input (using TV remote
	control.)

Output selection (DVD-VR336 only)

•Connect the DVD Recorder & VCR to your TV via HDMI or DVI. Set your TV's input to HDMI or DVI.

•Press the P.SCAN button while the unit is in Stop mode to select the output resolution.

-If your TV is connected the HDMI or DVI cable, the output resolution mode changes in the following

sequence each time you press the P.SCAN button:

→576p → 720p → 1080i

-If your TV is connected the AV or component cables(without HDMI/DVI cable), the output resolu- tion mode toggles 576p/576i in turn.

•HDMI/DVI cable does not support 576i. Video with 576i resolution can only be viewed through the analog outputs (Composite/S-Video/Component).

Even if HDMI/DVI cable is connected to your

Note TV, the AV connection outputs only 576i and the component connection outputs only 576p

irrespective of the on-screen display. Progressive scan automatically activates when HDMI is connected. (Please make sure PS is indicated on the front panel of the DVD Recorder & VCR.) There will be no HDMI video and audio outputs unless progressive scan function is activated. Consult your TV User’s Manual to find out if your TV supports Progressive Scan.

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

If Video Output is set incorrectly, the screen may be blocked.

The resolutions available for HDMI/DVI output depend on the connected TV or projector. For details, see the user’s manual of your TV or projector. When the resolution is changed it may take a few seconds for a normal image to appear.

If you set the HDMI output resolution 720p or 1080i, HDMI output provides better picture quality.