Roland KF-7 owner manual Cancelling the Effect, Fig.panel1-4

Chapter 1 Performance

Chapter 1

3. Touch the slider beneath the icons to adjust the effect selected.

Touch and slide the knob on the screen to the right for a deeper reverb, and to the left for less.

You can also move the slider with the [-] [+] buttons and the dial.

Pressing the [-] [+] buttons simultaneously returns the slider to the initial value. When you touch <Exit>, the reverb effect is activated, and you return to the previous screen.

Cancelling the Effect

4. Press the [Reverb] button, and watch the indicator light go out.

The reverb effect is eliminated.

■Adding Three-Dimensional Breadth to the

Sounds You Play (Advanced 3D)

You can add three-dimensional breadth to the sounds you play with automatic accompaniment (p. 46), or to internal songs or music files. With this effect, called “Advanced 3D,” you seem to be surrounded by the sound of the performance.

No effect is applied when the slider is moved all the way to the left. In this case, the button’s indicator won’t light up when you press the [Reverb] button.

fig.panel1-4

1. Press the [Advanced 3D] button and watch the indicator light up.

The following “Advanced 3D screen” appears.

fig.d-adv3d.eps_60

ON OFF

2. Touch the icon to switch the effect on or off for each individual part.

Three-dimensional breadth is added to the performance part you’ve selected. When you touch <Exit>, the Advanced 3D effect is activated, and you return to the previous screen.

Cancelling the Effect

3. Press the [Advanced 3D] button and watch the indicator goes out.

The Advanced 3D effect is eliminated, and the effect is no longer applied to any of the parts.

If all of the parts are switched off, the [Advanced 3D] button’s indicator won’t light up when you press the button.

28