Roland KF-7 Formatting the User Memory, Calibrating the Touch Screen, 151, Press the Disk button

Chapter 8 Various Settings

■Calibrating the Touch Screen

(Touch Screen)

If you’ve been using the touch screen for some time, the pointer may be shifted, making the KF-7 react incorrectly. You should correct this displacement when necessary by performing calibration (repositioning).

At step 3 in “Procedure” (p. 147), touch “Touch Screen.”

A screen like the one shown below appears.

fig.d-touchpanel.eps_50

Touch <Execute>.

Touch the points indicated.

*Do this carefully, because touching a location that’s different from the one indicated for the pointer may make the displacement even worse. Be sure to touch the pointer accurately.

When the calibration is finished, touch <Write> to store the settings.

*If you don’t write them to memory, the calibration settings will be discarded as soon as the power is switched off.

Returning the touch screen calibration settings to the original factory settings

If you touch <Factory Reset> in the above screen, the touch

screen calibration settings revert to the original factory

settings.

Formatting the User Memory

The KF-7 features an internal storage area where you can save recorded performances and User Styles. This space is called the “User Memory.”

The following content is stored to the user memory.

•Content registered to the “Favorites” (p. 68)

•Sets of saved User Programs (p. 109)

•User Styles saved on user memory (p. 135)

•Image files set with the “User Image settings” (p. 149)

To delete all of the content held in the user memory and restore the original factory settings, carry out the following procedure.

1.Press the [Disk] button.

Even when you press the Music Style [User] button (User/Disk screen) or the [User Program] button, the rest of the procedure is the same.

2.Touch <File>.

3.Touch <Format User Memory>.

A screen like the one shown below appears.

fig.d-touchpanel.eps_50

4.Touch <OK>.

All of the content in the user memory is deleted.

If you touch <Cancel>, the deletion is cancelled, and you’re returned to the previous screen.

*Never turn off the power while the display indicates <Executing...>. Doing so will damage the KF-7’s internal memory, making it unusable.

→Carrying out this operation does not initialize any settings other than the user memory settings. To restore settings other than those for the user memory to the original factory settings, carry out Factory Reset (p. 150).

Chapter 8

151