Roland KF-7 owner manual User Program Registration, Saving Performance Settings User Program, 107

Chapter 5 User Program Registration

Saving Performance Settings (User Program)

Any collection of settings, including those describing the current status of your data selections or settings Automatic Accompaniment, can be saved to the [User Program] button. You can then call up the stored settings by pressing the [User Program] button. Saving your preferred combinations of Music Styles and Tones, as well as other frequently used settings, makes it more convenient.

You can register up to 36 User Programs to the KF-7.

fig.panel_UPG

→For more on what can be registered to a User Program, refer to “Parameters Stored in the User Program” (p. 180).

1.Set the Music Style, Tone, and other data until the settings are the way you want them.

2.Press the [User Program] button.

A “User Program screen” like the one shown below

appears.

fig.d-upg.eps_50

3.Touch <Write>.

A “Write User Program screen” like the following

appears.

fig.d-upgwrite.eps_50

Determining the name of the User Programs

4.Touch <Rename>.

A “Rename screen” like the following appears.

fig.d-upgname.eps_50

When you touch , the cursor moves. When you touch the icon for the character to be input, the character appears of the cursor potion.

For example, touching the <ABC> icon in succession cycles you through the available choices in that character group (A→ B→ C→ A...).

Each touch of <A-a-0-!> cycles the type of characters through “English (upper case),” “English (lower case),” “numerals,” “symbols,” then back to “English (upper case).”

When you touch <Del>, the character at the cursor position is deleted.

When you touch <Ins>, a space is inserted at the cursor position.

5.When you have finished with the name, touch <Exit>. You’re returned to the Write User Program screen.

Determining the write destination

6.Touch to select the write-destination number.

7.Touch <Write>.

The confirmation message appears.

8.Touch <OK>.

The current performance settings are saved to the [User Program] button.

*Never turn off the power while the display indicates <Executing...>. Doing so will damage the KF-7’s internal memory, making it unusable.

→You can restore the content registered to the [User Program] button to the original factory settings. Refer to “Restoring the Factory Settings (Factory Reset)” (p. 150).

Chapter 5

107