Roland KF-7 owner manual Adjusting the Sound’s Volume and Brilliance, Connecting a Microphone

Before You Start Playing

Before You Start Playing

Adjusting the Sound’s Volume and Brilliance

Turn the [Volume] knob to adjust the overall volume.

Turn the [Brilliance] knob to adjust the brightness of the sound.

Connecting a Microphone

You can connect a microphone into the Mic In jack, and enjoy

karaoke with the KF-7.

fig.00-09

fig.00-07.e

Min Max Mellow Bright

Connecting Headphones

The unit’s speakers will go silent when you plug in headphones. This makes it convenient for playing at night, or at other times when you do not want to disturb others.

fig.00-08

1.Plug the headphones into the Phones jack at the front, on the left side of the piano.

The sound from the built-in speakers stops. Now, sound is heard only through the headphones.

2.Use the [Volume] knob on the KF-7 to adjust the volume of the headphones.

→Use Stereo headphones.

Some Notes on Using Headphones

•To prevent damage to the cord, handle the headphones only by the headset or the plug.

•The headphones may be damaged if the volume is too high when they are plugged in. Lower the volume on the KF-7 before plugging in the headphones.

•To prevent possible auditory damage, loss of hearing, or damage to the headphones, the headphones should not be used at an excessively high volume. Use the headphones at a moderate volume level.

1.Connect a microphone to the Mic In jack on the back of the instrument.

2.Rotate the [Mic Volume] knob next to the Mic In jack to adjust the volume level for the microphone.

→You can use a microphone (sold separately). When purchasing a microphone, please consult the vendor where you bought the KF-7.

Some Notes on Using a Microphone

•Be careful of high volume levels when using mikes late at night or early in the morning.

•When connecting a microphone to the KF-7, be sure to lower the volume. If the volume control is too high when the microphone is plugged in, noise may be produced by the speakers.

983• Howling could be produced depending on the location of microphones relative to speakers. This can be remedied by:

-Changing the orientation of the microphone.

-Relocating microphone at a greater distance from speakers.

-Lowering volume levels.

18