Chapter 4 Recording and Saving the Performance

Selecting the tone compatibility format (when saving to disks)

8. Touch <KF> or <MT>.

Some Tones are unique to the KF-7. Data that is recorded using these tones may not

play back correctly on other Roland Digital Pianos or Music Players. When you want

to save data so that it can be played back on another devices, save the data with

“MT” set as the Tone compatibility format.

Display

Explanation

 

 

 

 

KF

The song is saved as data capable of reproducing performances with

richness of expression using the KF-7’s special Tones.

 

 

 

 

Data is saved in a form that can also be played on the Roland Digital

MT

Pianos or Music Players other than the KF-7.

You can listen to songs saved in this format on the Roland HP-G/R se-

 

ries, KR series and KF series keyboards as well as on Roland MT series

 

devices.

 

 

<Note>

When data saved with “MT” as the Tone compatibility format is played back on this

instrument, some of the nuances that were part of the performance at the time the

data was recorded may be altered.

Even with data saved with “MT” as the Tone compatibility format, an exact

reproduction of the original performance may be unobtainable when using GS

devices other than Roland Pianos and Music Players.

Save

9. Touch <Save> or <As SMF> to start saving.

The resulting file format will be different depending on whether <Save> or <As

SMF> is chosen, as described below.

Display

Explanation

 

 

 

 

 

Saves the song in KF-7 format. You can listen to songs saved in

Save

this format on the Roland HP-G/R series, KR series and KF series

keyboards as well as on Roland MT series devices. This format is

 

 

called “i-format”.

 

 

 

Saves the song as an SMF (Standard MIDI Files). Songs saved in

Save As SMF

this SMF format can be listened to on many instruments that can

play SMF music files (p. 181).

 

A song recorded using commercial music files can’t be saved in

 

“Save As SMF” format for reasons of copyright protection.

 

 

The time required for saving ranges from several seconds to half a minute or more. Don’t take the floppy disk out of the disk drive until the saving process is finished. Touch <Exit> to return to the Song File screen.

NOTE

You can only save songs in one

format on a single floppy disk.

NOTE

Never turn off the power while the saving operation is in progress. Doing so will damage the KF-7’s internal memory, making it unusable.

It’s a good idea to get into the habit of moving the write- protect tab on the floppy disk to the “Protect” position when you’ve finished saving your data. Keeping the tab at “Protect” prevents operations that could erase your songs by mistake.

NOTE

Depending on the playback instrument, some notes may drop out or sound different.

Chapter 4

103

Page 103
Image 103
Roland KF-7 owner manual 103, Touch KF or MT, Touch Save or As SMF to start saving