Roland KF-7 Copying Sets of User Programs on Disks to the User Memory, 111, Touch Execute

Chapter 5 User Program Registration

Copying Sets of User Programs on Disks to the User Memory

You can copy sets of User Programs saved on floppy disks and to user memory.

You can also copy sets of User Programs saved in user memory and to floppy disks.

1.Insert the disk with the settings to be copied in the disk drive.

2.Touch the [User Program] button.

3.Touch <File>.

4.Touch <Copy>.

A “Copy User Programs screen” like the following

appears.

fig.d-upgcopy.eps_50

Specifying the copy source

5.Touch <Disk> to select the set of User Programs you want to copy.

When “All” is selected, all of the sets of User Programs on the disk are copied to user memory.

Specifying the copy destination

6.Touch <User> to select the copy destination for the set of User Programs.

If a User Program name is displayed, already a User Program saved to that number is already.

If you select a number with User Programs data, and then copy data to that number, the previously saved User Programs are deleted. If you do not want to delete the saved User Programs, select a number in the save- destination column for which no name is displayed.

7.Touch <Execute>.

The set of User Programs on the disk is saved to user memory.

*Never turn off the power or eject the floppy disk from the disk drive while the operation is in progress. Doing so will damage the KF-7’s internal memory, making it unusable.

■Coping Sets of User Programs Stored in the User Memory to

Disks

You can take User Program sets saved in user memory and copy them to floppy disks.

In this case, in the Copy User Programs screen in Step 4 above, touch the large arrow icon in the center to get the arrow to point up. This sets the KF-7 to copy the User Program set in the user memory to the floppy disk.

The rest of the procedure is identical to that used for copying sets of User Program set from disks to user memory.

Chapter 5

111