Roland KF-7 owner manual Stop recording, Listening to the Recorded Performance

Chapter 4 Recording and Saving the Performance

Chapter 4

When recording starts, the [	(Play/Stop)] and [	(Rec)] buttons’ indicators
light up.

Stop recording
6.	Press the [		(Play/Stop)] button.
	Recording stops.
	The performance is recorded to the [1/Whole] button.
Listening to the Recorded Performance
7.	Press the [	(Reset)] button, then press the [			(Play/Stop)] button.
	The recorded performance is played back.
	When you press the [			(Play/Stop)] button, playback stops.

Track buttons assignments for recorded performances

When you record only a keyboard performance, the performance will be assigned to the track buttons as follows.

•Normal performance (playing a single Tone from the entire keyboard)

The performance is recorded to the [1/Whole] button.

•Layer performance

The performance is recorded to the [1/Whole] button.

• Split performance

The left-hand part of the keyboard is recorded to the [3/Lower] button, and the right-hand part of the keyboard is recorded to the [4/Upper] button.

• Layer performance and Split performance

The left-hand part of the keyboard is recorded to the [3/Lower] button, and layer performance in the right-hand part of the keyboard is recorded to the [4/Upper] button.

•Drum set or sound effect performance

Recorded on the [R/Rhythm] button.

NOTE

Any performance that has been recorded is deleted when the power to the KF-7 is turned off. If you do not want a performance deleted, then save it to a floppy disk or to Favorites. Refer to “Saving Songs” (p. 101).

92