Connecting the | Connecting the |
| Component Video Cable |
Connections
You will enjoy high quality images.
1 | Connect one end of the | ||
output jack on the rear of the DVD | |||
|
| Recorder & VCR. | |
|
|
| |
2 | Plug the other end of the | ||
appropriate input connector on the television. | |||
|
|
| |
3 | Connect one end of the audio cable into the | ||
AUDIO | output jacks on the rear of the DVD |
Recorder & VCR.
• Take care to respect the colour coding of the left and right channels.
4 Plug the other end of the audio cables into the appropriate input connectors on the television.
You will enjoy high quality accurate colour reproduction images. Component video seperates the picture element into black and white(Y), blue(PB), red(PR) signals to present most clear and clean images.
1 | Connect Component video cables between the | |||
COMPONENT VIDEO OUT | jacks on the rear of | |||
|
| the DVD Recorder & VCR and COMPONENT | ||
|
| VIDEO IN | jacks on the rear of the TV. | |
|
|
| ||
2 | Connect audio cables between the audio output | |||
jacks on the rear of the DVD Recorder & VCR and | ||||
|
| AUDIO IN | jacks on the rear of the TV. |
•Take care to respect the colour coding of the up and down channels.
•Press the input selector on your TV remote control until the Component signal from the DVD Recorder & VCR appears on your TV screen.
COMPONENT INPUT
❚Progressive Scan
Your TV must support progressive scan input to allow to watch progressive scan component video out. (See page 38)