Troubleshooting (DVD)
Reference
Problem | Explanation/Solution | |
|
| |
icon appears on | You cannot use the operation or function due to one of the following reasons: | |
the screen. | (1) Your DVD disc does not support the feature (for example, angles) | |
| (2) You’ve requested a title, chapter, or scan time that is out of the correct range. | |
|
| |
Play mode settings are | The disc does not support all the selected functions. | |
different from the set- | In this case, some settings you configure on the Setting menu may not work properly. | |
tings configured with |
| |
the Setting menu. |
| |
|
| |
Cannot change the | Aspect ratio is fixed for DVD disc. | |
aspect ratio. |
| |
|
| |
No audio output. | Check whether you selected correct digital output options in the Audio Output Options menu. | |
|
| |
No video or audio output. | Did you move your DVD Recorder & VCR suddenly from a cold place to a warm place? In this case, | |
The disc tray is ejected | do not connect the plug to a power outlet and wait for two hours. Then insert the disc and try to | |
after 2 to 5 seconds. | playback again. It will work properly when condensation has evaporated. | |
|
| |
Angle operation does not | Angle operation is available only when the disc contains images captured at different angles. | |
work during playback of a |
| |
DVD disc. |
| |
|
| |
The disc revolves, but | • Check whether there is damage or foreign materials on your disc. | |
• Some discs with bad manufacturing quality may not be played back. | ||
no image or bad quali- | ||
• If the scene changes from dark to bright suddenly, the screen | ||
ty images are output. | ||
may jitter temporarily, but it is not a defect. | ||
| ||
|
| |
Desired audio | Audio languages and subtitle languages are | |
language and | Only the sound and subtitle languages contained on a DVD disc are | |
subtitle language | available and displayed on the disc menu. | |
are not played. |
| |
|
| |
No progressive | • Check whether PS is displayed on front panel. | |
output. | • Make sure to change the component video output using the Progressive button when | |
| the disc is stopped. | |
|
| |
The remote control | • Point the remote control at the remote control sensor on your DVD Recorder & VCR. | |
doesn’t work. | Operate within distance. (15ft) | |
| Remove obstacles between your DVD Recorder & VCR and remote control. | |
| • Check whether the batteries are depleted. | |
|
| |
Other problems | • Read the table of contents and then find and read the sections | |
| describing your problem, and follow the directions given. | |
| • Turn the unit off and on. | |
| • If your problem still persists, contact your nearest Samsung service centre. | |
|
| |
No HDMI output. | • Check the Video output is HDMI enabled. | |
| • Check the connection between the TV and the HDMI jack of the DVD Recorder & VCR. | |
| • See if your TV supports this 576p/720p/1080i DVD Recorder & VCR. | |
|
| |
Abnormal HDMI | • If snow noise appears on the screen, it means that TV does not support HDCP (High- | |
output screen. | bandwidth Digital Content Protection). | |
|
| |
HDMI output Jitter | • Check your TV system setup correctly. | |
| • Screen Jitter may occur when the frame rate is converted from 50Hz to 60Hz | |
| for 720p/1080i HDMI (High Definition Multimedia Interface) Output. | |
| • Please refer to the user’s manual of your TV. | |
|
|