connecting & setting up

COnnECTing DVD rECOrDEr & VCr TO THE TV USing THE rF CaBLE

M ` Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables.

1.Remove the aerial or network input cable from the television.

. Connect this cable to the 75Ω aerial jack marked on the rear of your DVD Recorder & VCR. . Plug the RF Cable supplied into the jack on your DVD Recorder & VCR.

. Plug the other end of the RF Cable into the connector previously used for the aerial on the television.

M ` The RF cable connection of this product sends only signal of TV.

`You must connect Audio/Video cables to watch a DVD and Video tape from your DVD Recorder & VCR.

To rF in

To rF OUT

To anT inPUT

0_ connecting & setting up

Page 20
Image 20
Samsung DVD-VR370, DVD-VR375A COnnECTing DVD rECOrDEr & VCr to the TV USing the rF CaBLE, To rF To rF OUT To anT inPUT