Samsung DVD-VR370 Digital Out, Dolby Digital DVDs only, DTS DVD VIDEOs only, Mpeg DVD VIDEOs only

system setup

Digital Out

Selects audio options for signals output from the DIGITAL AUDIO OUT (COAXIAL).

The following setup items switches the method of outputting audio signals when you connect a component such as an amplifier (receiver) with a digital input jack. For connection details, see "AV Receiver Connections" on page 24.

M	` If you connect a component that does not accept the selected audio
	signal, a loud noise (or no sound) will come out from the speakers, and
	may affect your ears or cause speaker damage.

Audio			12:00
Title List	Digital Out	: On
		✔ On
Timer	Downmix	: DolbyOff	Surround
	Audio DRC	: Standard
Edit	Scan Audio	: On
Dubbing	Surround	: Off
	AV Audio Input	: Stereo
Disc
Setting
Setup
> Move	sOk	rReturn	eExit
Digital Out			12:00

Title List	Dolby Digital	: D-PCM
	DTS	: Off
Timer
	MPEG	: PCM
Edit
Dubbing
Disc
Setting
Setup
> Move	sOk	rReturn	eExit

Dolby Digital (DVDs only)

Selects the type of Dolby Digital signal.

~D-PCM : Select this when the recorder is connected to an audio component that does not have a built- in Dolby Digital decoder.

~Dolby Digital : Select this when the recorder is connected to an audio component with a built-in Dolby Digital decoder.

DTS (DVD VIDEOs only)

Selects whether or not to output DTS signals.

~On : Select this when the recorder is connected to an audio component with a built-in DTS decoder.

~Off : Select this when the recorder is connected to an audio component without a built-in DTS decoder.

MPEG (DVD VIDEOs only)

Selects the type of MPEG audio signal.

~PCM : Select this when the recorder is connected to an audio component without a built-in MPEG decoder. If you play MPEG audio sound tracks, the recorder outputs stereo signals.

~MPEG : Select this when the recorder is connected to an audio component with a built-in MPEG decoder.

34_ system setup