Samsung DVD-VR370, DVD-VR375A user manual Playing a Disc, Discs that cannot be played

playback

Discs that cannot be played

~DVD-Video with a region number other than “4” or “ALL”

~3.9 GB DVD-R Disc for Authoring.

~A DVD-RW(V)/-R(V)/+R disc which has been recorded and not finalised in a different manufacturer’s recorder.

~DVD-ROM/PD/MV-Disc, etc

~VCD/SVCD/CVD/CD-ROM/CDV/CD-G/CD-I

~BD, HD-DVD

M ` This DVD Recorder & VCR can only operate with discs that are compatible with DVD-RAM Standard Version 2.0.

`Playback and/or recording may not work for some types of discs, or when specific operations, such as angle change and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please refer to this if necessary.

`Do not allow the disc to become dirty or scratched, finger prints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for recording.

`DVD-RAM/±RW/±R discs may not be able to play on some DVD players, depending on the player, disc and the condition of the recording.

`Discs with NTSC programmes recorded on them can be played but cannot be recorded using this product.

Playing a Disc

1.Press the OPEN/CLOSE button.

. Place a disc gently into the tray with the disc’s label facing up. . Press the OPEN/CLOSE button to close the disc tray.

~The DVD Recorder & VCR does not play discs automatically after being powered on initially.

~When the DVD Recorder & VCR is powered on and a disc is in the tray, the unit will be activated and wait in stop status.

~Press the PLAY() button to start playback.

. Press the STOP() button to stop playback.

M `	When you stop playing back a disc, the DVD Recorder & VCR remembers where you stopped, so when you press
	PLAY ( ) button again, it will pick up where you left off . (Unless the disc is removed or the DVD Recorder & VCR is
	unplugged, or if you press the STOP ( ) button twice.)
J `	Do not move your DVD Recorder & VCR while playing, as this may cause damage to the disc.

`Make sure to press the OPEN/CLOSE button to open or close the disc tray.

`Do not push the disc tray while it is being opened or closed, as this may cause a product malfunction.

`Do not place foreign materials on or in the disc tray.

`Some functions may perform differently or be disabled depending on the disc type. If this occurs, refer to the instructions written on the disc case.

`Be especially careful that children’s fingers are not caught between the disc tray and the tray chassis when it closes.

`After turning power on, it will take a few seconds until the DVD Recorder & VCR operates.

46_ playback