system setup
•Program : Press ▲▼ repeatedly to select the programme position (01 to 99) for the channel and press the OK button.
•Channel : Tune the channel using ▲▼ buttons.
•AFT : Fine tunes the channel to obtain a clearer picture.
If the picture is not clear, select "Off" and press the OK button.
When the fine tuning bar appears, press the ◄ ► buttons to obtain a clearer picture, then press the OK button.
• Tuner Audio : Sets the channels for the NICAM broadcast.
Normally, select "NICAM." If the sound from the NICAM broadcast is not clear, select "Standard" and then press the OK button.
•Station Name : Display station name automatically detected in broadcasting signal. If not detected, you can edit name by using ▲▼◄ ► buttons.
Channel List
You can swap or delete the desired channel in the channel list. To setup, follow steps 1~2 on page 29.
. Press the ▲▼ buttons to select Channel List, the press the OK button.
The list of all the preset channels appears.
~Swap : Select the channel you want to swap by pressing the ▲▼ buttons, then press the OK button.
Move the channel by press the ▲▼ buttons, then press the OK button.
~Delete : Select the channel you want to delete by pressing the ▲▼ buttons, then press the CANCEL button.
Channel List |
|
| 12:00 |
Prog. | Ch | Name | ▲ |
1 | 01 | AAAA |
|
2 |
| ||
3 | 05 | BBB |
|
4 | 07 | ARD |
|
5 |
| ||
6 |
| ||
|
|
| ▼ |
> Move | sSwap | Cancel | rReturn |
|
|
|
|
Clock Set
1.With the unit in Stop mode, press the MENU button.
. Press the ▲▼ buttons to select Setup, then press the OK button.
. Press the ▲▼ buttons to select Clock Set, then press the OK button.
Setup |
|
| 12:00 |
Title List | Tuner Preset |
|
|
Timer | Clock Set |
|
|
Video |
|
| |
|
|
| |
Edit | Audio |
|
|
Dubbing | Features |
|
|
Options |
|
| |
Disc |
|
| |
|
|
| |
Setting |
|
|
|
Setup |
|
|
|
> Move | sOk | rReturn | eExit |
30_ system setup