Sharpness
You can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory.
SHARPNESS |
SOFT |
NORMAL |
VIVID |
Sub menu | Icon | Description |
The edges of the image are softened.
SOFT
This effect is suitable for editing images on your PC.
The edges of the image are sharp.
NORMAL
This is suitable for printing.
The edges of the image are emphasized. The edges will appear
VIVID
sharp, but noise may occur in the recorded image.
OSD(On Screen Display) information
In any mode with the exception of VOICE RECORDING mode, you can check the recording status in the LCD monitor.
Idle mode : If you select the [SAVE MODE] and the camera isn't operated during the specified time(about 30 SEC.), the camera power will be idle (LCD monitor : OFF, Camera status lamp : Blinking) automatically.
-To use the camera again, press any of the camera buttons except the power switch.
-If there is no operation during the specified time, the camera power will be turned off automatically to save battery life. Refer to page 86 for more information about the auto power off function.
18
18
[Full information mode] | [Basic information mode] |
55
