Samsung EC-A7ZZZSAA, EC-A7ZZZSBB/E1, EC-A7ZZZSBB/US, EC-V70ZZSAA manual PictBridge Picture Selection

PictBridge: Picture Selection

❾✃ Select pictures to print
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] before you connect the camera to
the printer. (See p.69)		IMAGES
2. The [IMAGES] menu will appear.		SELECT
3. Use the UP and DOWN buttons to select the desired		ALL
submenu value, and then press the OK button.
		MOVE:	SET:OK
When [SELECT] is selected	: The PictBridge function will
	be applied only to the picture currently displayed.
When [ALL] is selected	: The PictBridge function will be applied to all pictures,
	excluding movie clips and voice files.

❾➴ Setting the Number of Copies to Print

-Select [SELECT] or [ALL]. A screen where you can set the number of copies to print will appear as shown below.

	0 PRINTS
EXIT:SH1
MOVE PIC:	SET:OK

[ When [SELECT] is selected ]

	0 PRINTS
EXIT:SH1	SET:OK

[ When [ALL] is selected ]

-Press the Up/ Down button to select the number of prints. Maximum 30 prints.

-Use the Left/Right button to select another picture and select the number of prints for another picture.

-After setting the number of prints, press the OK button to save.

-Press the Shutter button to return to the menu without setting the number of prints.

❾➓70❾➔